scsi negotiate
This command configures the driver on a per-initiator basis to either initiate
negotiation of the SCSI data path with a given initiator according to the
current settings of the wide and synch flags, or to wait for the initiator to
initiate data path negotiation.
If bit N of the flag parameter passed to this command is set to 1, then the
driver will initiate data path negotiation with intiator N at its first
opportunity, if the initiator does not do so first. If it is set to 0, then it
will wait for the initiator to start negotiation. The settings are not saved to
NVS RAM and will be lost at the next reset.
The default is to initiate negotiation with each initiator
All
scsi negotiate <16 bit flag in hex>